Quick Answer: Calgary commercial flat roof inspection priorities shift by membrane type. SBS modified bitumen needs granule loss and end-lap inspection. TPO needs seam weld testing and chalking assessment. EPDM needs a shrinkage and lap adhesion review. PVC and other single-ply systems need plasticizer migration and seam integrity checks. Inspectors qualified across all four membrane types are the safer choice for buildings with hybrid systems. Calgary commercial buildings us

Quick Answer: A comprehensive Calgary commercial roof inspection covers seven domains: membrane condition, seams and flashings, drainage, mechanical equipment interface, structural review, interior leak mapping, and written documentation. The field inspection takes 1 to 5 hours, depending on building size. The deliverable is a written report with dated photos, severity ratings, and recommended actions that support insurance, lender, and capex decisions. Property managers and

Quick Answer: A Calgary commercial roof inspection in 2026 typically costs $0.05 to $0.15 per square foot, with most single-building flat fees landing between $400 and $2,500. Comprehensive inspections that include drone aerial imaging and infrared thermal scans run $0.10 to $0.30 per sq ft. Multi-building portfolios and recurring maintenance contracts often reduce the per-building rate by 15% to 30%. Inspection cost is one of the easiest line items to defend in a commercial

Quick Answer: Calgary commercial roofs should be inspected twice yearly (spring and fall) at a minimum, plus after any major hail or wind event. New buildings under 5 years old can sometimes run on an annual cadence; aging buildings over 16 years old benefit from quarterly visual checks added to the twice-yearly comprehensive inspection. Insurance carrier requirements often set the floor and should be confirmed annually. A defensible inspection cadence is the foundation of ev

Quick Answer: A Calgary commercial roof inspection is a structured assessment of the membrane, flashings, drainage, and structural integrity of a flat or low-slope roofing system, typically priced at $0.05 to $0.15 per square foot or $400 to $2,500 flat for buildings under 50,000 sq ft. Best practice in Calgary is twice yearly (spring and fall) plus event-driven inspections after any major hail or wind storm. The written report becomes the basis for insurance compliance, cape