Advantages of Using Standing Seam Metal Roofing

Standing Seam Metal Roof in Calgary

Are you looking for a new roofing alternative? Whether you want to renovate your existing home or install a different roof on your new house, you will always want the best material to put a cover on top of your shelter. The options are quite broad because shingles and rubber materials are excellent choices for Alberta roofs. However, standing seam metal roofing offers far superior durability if you want the best defence for your property.

 

What is Standing Seam Metal Roofing?

It’s a metal roof. To be clear, the term standing doesn’t mean it's actually standing. This type of metal roofing features a long, vertical, concealed-fastener system, usually made from steel, aluminum, or copper. Standing seam metal roof sizing is usually in the range of 22 to 29 gauge. Despite being thin, it is safe to walk on and hard enough to withstand weather-related impacts.

Types of Metal Roof Materials

Steel

Rusting in steel roofs occurs when moisture is trapped and exposed to oxygen and water. The metal roof that Angel's Roofing installs in your home is made of galvanized steel, coated with anti-rust elements such as zinc, to prevent rusting over time.

Aluminum

Compared to steel, Aluminum will never rust because of its high affinity with oxygen, which gives it a prominent level of resistance to corrosion. It’s the exact same reason aircraft exteriors are built with aluminum components. Aluminum roofing is best installed on homes with a minimum slope of 3:12.

Copper

Just like Aluminum, Copper is also immune to rusting because of its low iron content. Copper roofing is highly fire-resistant, and it thaws ice faster than other metals. Since copper is highly conductive to electricity, it would increase your home’s energy efficiency. However, the only disadvantage is the slightly higher cost than other metal roofs.

What to Know About Standing Seam Metal Roofing in Alberta

Standing seam is one of the toughest metal roofing selections in Alberta. Whether for residential or commercial roofing, metal roofing is underutilized because of many misconceptions, such as being too prone to rust and not durable enough because of its thinness. Standing seam metal roofing is a great choice for agricultural and industrial settings.

There are four known types of standing-seam metal roofing, and they all perform the same functions. The choice comes down to the owner's preference.

4 types of Standing Seam Metal Roofing

 

Snap Lock

Snap Lock is a type of standing seam metal roofing that features roll-formed sharp edges that clip together. The male and female legs are fastened beneath the panel to make it look neat.

Mechanical Seam

Like Snap Lock, the mechanical seam is almost identical but more securely fastened, but unlike Snap Lock, it’s harder to undo.

Batten Panel

A seal attachment at the edge of two standing seams together. Depending on the installation, Batten Panel outclasses both Snap Lock and Mechanical Seam in terms of security. However, Batten Panel may cost slightly more due to the additional materials required.

Fastener Flange

A type of standing seam that requires bolts or screws to be installed on the roof. Typically used in agricultural and industrial areas.

7 Main Reasons Why Standing Seam Metal Roofing is for You

Wind Resistant

Provinces like Alberta are often cursed with strong winds. Thanks to its ability to withstand strong gale-force winds, the standing seam metal roof is by far the best roofing option for protecting your home from high winds. It can withstand violent storms with destructive winds of 70 kilometres per hour (about 43.5 mi/h).

Snow Retention

The aftermath of heavy snowfall will not remain on your roof for a long time because of metal’s ability to absorb heat. It melts and thaws ice faster than other roofing materials. Accumulated snow will slide off the ground because of the smooth surface of standing-seam metal roofing. Your metal roof will be highly resistant to dents, thanks to its durability; even ¾-inch hail won't dent it.

Energy Sufficient

Metal elements can absorb and retain solar heat, improving home energy efficiency. In Alberta, you can save up to 40 percent of energy costs all year round. You can rest more comfortably without being affected much by the cold temperature.

Strongest Metal Roofing Option

Metal roofing has a life expectancy of more than 70 years. The sheet metal of standing seam has extensive durability; it won’t be easily punctured or penetrated by outside elements. Standing seam is compatible with PDVC coating (Poly-Vinylidene Chloride) as an additional attachment to extend your metal roofing's lifespan beyond usual expectations and provide extra protection.

Unique Designs

Standing seam metal roofing is customizable in every viable way, from colour and patterns to design and style. It really is up to the homeowners to decide what kind of look they want for their metal roofing. It’s the easiest roofing option to perform any makeover.

Lightweight

Standing seam is exceptionally light, weighing around 100 lbs. per 100 square feet (about the area of an apartment bedroom), compared to alternative roofing materials that weigh about 300 lbs. per 100 square feet. Being incredibly light does not affect its durability and performance.

Low Maintenance

Homeowners can save up to 20 percent on roofing costs when a standing seam metal roof is installed, thanks to its high durability. You won’t need as much inspection or maintenance on your roofing. For commercial metal roofing, you can save 25 percent on roofing expenses.

If you want to up your roofing game with standing seam metal roofing, your home needs a perfect installation to ensure safety and non-leakage. Angel's Roofing has years of experience in commercial and residential roofing. Let’s get your standing seam metal roofing installed today.